Archive | Crawl Space Inspection RSS for this section

Mobile Home Inspections

Well I know its been a while since our last blog. Some family travel and work. So today I wanted to blog about Mobile Home Inspections. And the key point that should be known if you plan on buying one. So lets begin.

A mobile home inspection is similar to a regular home inspection. There are some differences though. For example, they do not have a foundation, they sit on blocks. They normally have a heat pump or an air conditioner with auxiliary heat. And a lot of times the piping for the plumbing maybe PEX instead of CPVC.  Now I am going to get into abit of technical below of what is good and bad and should be upgraded.

Mobile homes have straps to hold the home down incase of bad storms, especially in Florida. The concrete block should be in a shoe or resting on a plate. Older homes will not. The biggest key to the blocks is making shore they do not crack. If cracking is involved in the block then there is some kind of movement. The HVAC system hardly ever has an air handler unit. Its normally one unit outside. Its very important to keep these maintained. The heater part is 3 coils like a toaster with a small fan. The air conditioner part has coils and need to be cleaned to improve air flow.  And now the piping. Years ago manufactures where using polyethylene style pipe. The fittings were faulty and would blow apart. Now not all gray pipe is this style. A newer system has come out and is PEX. The key component to this is making sure the fittings are proper.

Additionally, for a mobile home you may want to consider adding a salt treatment for the water and probably some kind of purification system.  Your roof if it is metal you will want to keep clean and remove debris. You want your inspector to inspect the crawl space fully! And lastly the major difference between a mobile home and a slab style home is the data tag. This is the vin number of the home or side. If it is a double, you have 2. Key reference point to any mobile home inspection.

For more information about mobile home inspections or any other type, feel free to call our office anytime at 352-322-2700. Look us up on the web at www.emeraldinspectionservice.com

We will glad to perform this type of inspection and several others in Mulberry, Hernando, Clearwater and Land O Lakes Florida anytime. Thank You.

crawlspce

 

Pre-Sale and Seller Inspections

This weeks blog is about home owners that are going to place their property on the market after they have been in their home for several years.  There is a mis-understanding about the term, pre-sale inspection or seller inspection. In this blog we will discuss the differences and additionally, as a bonus what a “Move In Ready Home” is. So lets begin.

A few weeks ago, a client asked to have his properties inspected. Basically the client is going to place the homes on the market in the Tampa Bay and Inverness Florida area. As time has gone by since we launched these campaigns we have changed a bit for the market we are in. First we explain the difference between seller inspection and pre-sale inspection. And as you are reading this blog you are asking the same question.

A “seller inspection” is an inspection that a home inspector will report the deficiencies that are to be recorded at the time of the inspection. We consult with the seller to advise them of the repairs that should be corrected, before placing the home on the market. This can be useful in several ways as when home owners are in a home for a few years they get compalicent and maybe their eyes do not see or don’t know what is happening in the home. The inspection report is delivered to the home owner and or Realtor and let them know to correct the deficiencies.

Now lets talk about “Pre-Sale Inspections”! This is our favorite type of inspection. This inspection is very similar to the “seller inspection” but has a huge difference in the reporting. The inspector should be educated to report on how a property should look for potential clients. For example, when inspecting under the kitchen sink, home inspection reports will inspect to see if any leaks and visible water stains. The Pre-Sale inspection will take this several steps further. When we inspect this element, we inspect age, deterioration, condition of piping, and additionally water stains. Then we consult with the client how to improve elements of that part of the report. Now keep in mind, that’s one element of the report. We fully consult each area of our report with clients when it is a “Pre-Sale” Inspection. This report advises the client of how to correct and or update the deficiencies to place the home on the market.

And lastly, the big way to help your property sell quickly then other properties. There is a National Accredited Program called “Move In Ready”!  This program takes the inspection whether its a “seller inspection” or “pre-sale inspection” and make the home “Move In Ready”! Sort of the best of best of both worlds. What Emerald Inspection Service does, we consult with home owners how to take deficiencies on the report and advise them to not only correct but improve the home. When a client decides to move forward with this program, we re-inspect the property to make sure the deficiencies are repaired or corrected.  We place a Certificate that states “Move In Ready”! From there the potential home owner can understand better of the deficiencies that were corrected to make the home; “Move In Ready”!

 

moveincertified

 

To learn more about these type of inspections, please visit our website for the following links;

https://www.emeraldinspectionservice.com/move-in-certify.html

https://www.emeraldinspectionservice.com/services.html

Feel free to call us anytime at 352-437-5300. We can perform these type of inspections and many more in a 36 hour notice, from Clermont to Ocala, from Kissimmee to Polk City Florida and other communities as well.

 

 

4 Point Inspections

This weeks blog is about 4 point inspections. The purpose of 4 point inspections and some tricky sales gimmicks of other companies that inflate the inspection process. So lets begin.

A “Four-Point Inspection” is an inspection catered to the insurance companies. With this type of inspection an insurance carrier does not want to go thru 50 plus pages of a home inspection report. There is a lot of software out there and all is different reporting styles when it comes to the actual 4 points.

The 4 Points inspected are: Roof, Electrical, Plumbing, and HVAC. So for example, the roof is inspected to make sure no leaks, no turn shingles and also no condensation in the attic. The electrical has to be in good working order. This means the panel box has no double taps, no over heated breakers and that if aluminum multi-strand wire, the wire has an oxidizing agent applied to the wire. When the plumbing is inspected there can not be any leaks under sinks, hot water heater is in good working order, no corrosion on pipes and if a well is on premise the well pump and filtration system is in good working order.

Lastly, is the HVAC system. Here in Florida, a lot of times we will see heat pumps. This is your a/c and heat. The air handler unit is usually in the garage or the attic. We check to make sure the system is performing properly. No burnt wires inside the housing, the coils are cleaned on the units, drip pans are not clogged, the disconnects to the units work properly and the thermostat is working properly. I usually check the ambient temperature to compare to the outside. Keep in mind that the a/c can not be checked if the outside temperature is below 60 degrees. This may cause damage to the compressor and other components of the system.

So above is the inspection points of the Four Point Inspection. The inspector also, has to check with the local government building department for permits on the home, for the 4 Points.

Now lets briefly discuss why insurance companies require them. First of all, any home over 25 years old the systems may start to enter the bonus life of the system. For example, if a hot water heater is over 15years of age. Its time to replace or really start to budget for that item. So the insurance carrier wants to see if there are any updates been done to the home. The 4 Point Inspection is not to be considered a full general inspection, nor is it never to be. The reporting for the 4 Point is on insurance dedicated forms. For example, “Citizens Insurance”, ” Tower Hill” or “State Farm” insurance.

In closing a lot of home inspection companies will offer this service as an ancillary service with the home inspection, only. We offer this service as a full service for our clients. And you may here from time to time catch phrases during the inspection process of 7 points, 21 points, etc. Pay no attention to them. At Emerald Inspection Service, you have your 4 Point Inspection, our self generated 5 Point Inspection which is for mobile homes and investors only, and the General Inspection. We perform these type of inspections from Sebring to Hernando. From Saint Petersburg to Sumterville Florida within a 24-36 hour time frame. For more information about #4PointInspections  go to our website: https://www.emeraldinspectionservice.com/4-point-inspections.html

Or call us anytime, 352-322-2700 or 844 RADON 40.

4PointInspector

Insulation and Ventilation

No matter what part of the country you are in, this is winter season. Some of us in the North are experiencing freezing temperatures as the high. Where some of us in the South are experiencing mild temperatures in the 60’s. No matter where you are at, your attic, crawl space, basement, and ventilation systems should be proper. This weeks blog will discuss this topic in detail.

So, lets begin. For home owners that have a basement this area will get cold first. Its usually best to have the area set at a comfortable temperature when not in use. If its un-finished, then it maybe best to put a couple of heat lamps in the lights and have on at night. This is an inexpensive way to keep the chill from coming up into the living areas.

For those of us, who have crawl spaces with vents. Close the vents in the block. This will help keep the wind and cold from entering the area. If you have the ability to have lights in there, heat lamps at night also will help. Especially, if you have tile floors. The warmth will help keep the tile a bit warm and not that chill at 6am.

Alot of people think that closing the soffit vents in winter will help keep the house warm in the attic. As this may help the attic stay warm this will also hurt the roof. The attic is your main area for heat to escape. Yes even in winter. I recommend to make sure the soffit is not restricted so the air can enter and leave the home freely. I would recommend closing the gable vents though. This will help with the chill at night or if you live in the north the snow coming in.

Lastly, the insulation. Alot of people think oh. Let me just add more R-30 to the attic. Or I will insulate the rafters. Before doing that, check with a contractor. Over insulating an area is more harmful then no insulation. For example, if you have cellulose in the attic. There is a proper depth for the insulation. The insulation should be at that depth and not walked on. Insulating the rafters unless approved by a GC is sometimes harmful and will make the shingles sweat and per-maturely age them.  However, adding insulation to the floor joists in the basement area is an economical way of keeping the chill from entering the living areas.

The purpose of this blog, is that soon homes will need energy audits. By following some few tips to help with the keeping the energy bill low will additionally help you with the audit. We are in the process of obtaining the certification. For more information, visit us at; www.emeraldinspectionservice.com or call us anytime. 352-322-2700. We will be happy to perform an attic or crawl space inspection anywhere in Florida. We typically can perform this with a quick turn around in Tampa, Ocala, Clearwater and Polk City Florida.

%d bloggers like this: