Well we are all in the middle of summer. A lot of us enjoying the pool with family and friends. The night time cook outs with the kids and just soaking up the sun. Some of us enjoy the pool all year long. While some of us have the use of the pool til September. While we are on inspections we perform the pool inspection for clients. But that unknown fact of maintenance is more important for life long time of the systems. So I wanted to share with you some basic tips to keep the pool dude away and save you some money. So lets begin.
First its important to maintain the pool water area at all times with the right chlorine or salt balance. Too much or too little will affect the water and your skin. If we get a heavy rain for few days it is best to shock the water. This kills off the algae. And yes you have the leaves that we all hate, but they have to be skimmed daily too. But there is a bit more too it then just that. For example, the coping and tile. These areas will receive the abuse from the sun, the water and just usage. It is a good idea to check to make sure the grout is in tact, the coping sealant is not shrinking or ruffled and no loose tiles. This is also easy maintenance items that a home owner can do or the pool dude.
Now lets get into the pump area. It may seem like its a maze but really it isn’t. The time clock if it is analog you want to make sure that the stops are on tightly. That the weather cover is in tact and that the clock is set properly. Nothing like having the pump come on at 3 am. And here is the mystery math about how long to run the pump. You should run it 1 hour per 10 degrees of outside temperature. So for example if its 90 degrees you should run the pump 9 hours.
Of course we will be gladly to assist you with this or contact your local pool maintenance company. We inspect pools as a primary service in the Clearwater, Ocala, Tampa and Lakeland Florida areas. We will go to other communities as well. http://www.emeraldinspectionservice.com
This weeks blog is about home owners that are going to place their property on the market after they have been in their home for several years. There is a mis-understanding about the term, pre-sale inspection or seller inspection. In this blog we will discuss the differences and additionally, as a bonus what a “Move In Ready Home” is. So lets begin.
A few weeks ago, a client asked to have his properties inspected. Basically the client is going to place the homes on the market in the Tampa Bay and Inverness Florida area. As time has gone by since we launched these campaigns we have changed a bit for the market we are in. First we explain the difference between seller inspection and pre-sale inspection. And as you are reading this blog you are asking the same question.
A “seller inspection” is an inspection that a home inspector will report the deficiencies that are to be recorded at the time of the inspection. We consult with the seller to advise them of the repairs that should be corrected, before placing the home on the market. This can be useful in several ways as when home owners are in a home for a few years they get compalicent and maybe their eyes do not see or don’t know what is happening in the home. The inspection report is delivered to the home owner and or Realtor and let them know to correct the deficiencies.
Now lets talk about “Pre-Sale Inspections”! This is our favorite type of inspection. This inspection is very similar to the “seller inspection” but has a huge difference in the reporting. The inspector should be educated to report on how a property should look for potential clients. For example, when inspecting under the kitchen sink, home inspection reports will inspect to see if any leaks and visible water stains. The Pre-Sale inspection will take this several steps further. When we inspect this element, we inspect age, deterioration, condition of piping, and additionally water stains. Then we consult with the client how to improve elements of that part of the report. Now keep in mind, that’s one element of the report. We fully consult each area of our report with clients when it is a “Pre-Sale” Inspection. This report advises the client of how to correct and or update the deficiencies to place the home on the market.
And lastly, the big way to help your property sell quickly then other properties. There is a National Accredited Program called “Move In Ready”! This program takes the inspection whether its a “seller inspection” or “pre-sale inspection” and make the home “Move In Ready”! Sort of the best of best of both worlds. What Emerald Inspection Service does, we consult with home owners how to take deficiencies on the report and advise them to not only correct but improve the home. When a client decides to move forward with this program, we re-inspect the property to make sure the deficiencies are repaired or corrected. We place a Certificate that states “Move In Ready”! From there the potential home owner can understand better of the deficiencies that were corrected to make the home; “Move In Ready”!
To learn more about these type of inspections, please visit our website for the following links;
Feel free to call us anytime at 352-437-5300. We can perform these type of inspections and many more in a 36 hour notice, from Clermont to Ocala, from Kissimmee to Polk City Florida and other communities as well.